木工字梁剪力墙模板-Woodworking beam shear wall formwork

Timber Beam Wall Fo一、体系介绍（1）体系属于无框木梁胶合板模板竖向体系（2）由 18mm 厚多层板面板、H20（200mm*80mm) 木梁、背楞、木梁连接爪、挑架、斜撑、阳角对拉器、直角芯带、直芯带、穿墙螺栓、PVC 套管、套管堵头、吊钩、钢销等配件组合而成。

3.木构架建筑

（3）该体系广泛应用于建筑、水利水电、桥涵、高耸构筑物等各类工程上的混凝土模板工程、房屋木结构、临时设施承重结构等(1) the system belongs to the vertical system of plywood formwork with frameless wooden beams. 。

4.木结构墙体施工方案

(2) the utility model is composed of 18mm thick multi-layer panel, H20(200mm * 80mm) wooden beam, back ridge, wooden beam connecting claw, overhanging frame, inclined brace, positive angle pair puller, right angle core belt, straight core belt, wall-piercing bolt, PVC casing, casing plug, hook, steel pin, etc. .

5.木构框架结构

(3) the system is widely used in concrete formwork engineering, wood structure of buildings, load-bearing structure of temporary facilities, etc. .

6.木构架式建筑

核心筒剪力墙模板13717890889

7.木构架有哪些优缺点

交通枢纽剪力墙模板13717890889

8.墙面木架造型

机场基础设施钢结构剪力墙模板13717890889

9.木骨架组合墙体技术规范

高铁车站高大剪力墙模板13717890889

10.木结构墙体

机场雨棚工程剪力墙模板13717890889二、主要技术参数：重量（kg/m2）约 65承受极限载荷（kN/ m2） 60周转次数 200穿墙螺栓极限载荷（kN） 160吊钩最大起吊重量（kg） 1500

模板规格依据实际工程而定Important Technical Parameter:Weight (kg/m2) Approx 65Max. Load (kN/ m2) 60Turnover Times 200

Tie Rod Max. Load (kN) 160Lifting Hook Ma.x Safe Working Load (kg) 1500Standard Spec According to the project

体系特点（1）模板面积大、拼缝少、适用性强，可以按需要灵活拼装成各种形状的模板结构，尤其是形状比较复杂的结构，为建筑设计提供了广阔的空间（2）刚度大、重量轻、承载能力强，大大减少了支撑，扩大了楼层施工空间。

（3）拆装方便、使用灵活，易在现场组装及解体，使施工速度大大提高（4）各连接件标准化程度高，通用性强（5）造价低廉，重复使用次数高，从而降低了工程整体成本 The system features (1) the template area is big, the seam is few, the applicability is strong, may according to the need nimbly assembles each kind of shape template structure, especially the shape quite complex structure, it provides a wide space for architectural design.

(2) large stiffness, light weight, strong bearing capacity, greatly reduce the support, expand the floor construction space.

(3) it is convenient to disassemble and assemble, flexible to use, easy to assemble and disassemble on the spot, so that the construction speed is greatly increased.

(4) all the connectors are highly standardized and universal. (5) the cost is low and the repeated use times are high, so the overall cost of the project is reduced.

返回搜狐，查看更多责任编辑：

方钉导航